ABS
Pipe

ABS pipe is extruded from acrylonitrile butadiene styrene, a light and impact-tough thermoplastic that will not corrode in water, wastewater, aeration or dilute chemical service. Sizes, wall thickness and pressure rating are confirmed against your duty, so everything below is quoted on request.

Request a Quote Technical Details

ABSTerpolymer

Solvent weldJointing

1.04 – 1.07g/cm³ typical

On requestSize & pressure

ABS pipe with yellow inner wall, five pipe ends facing forward

Material

ABS terpolymer

Density (typical)

1.04 – 1.07 g/cm³

Water absorption (typical)

≤ 0.45 % at 23 °C

Jointing

Solvent cement or mechanical

Price

On request

Why this pipe

Light to handle,
corrosion-free in service

ABS gives you a pipe run that installs quickly, resists aggressive water and keeps a smooth bore for years — without the weight and maintenance of metal.

Light and easy to install

ABS has a density of roughly 1.04 – 1.07 g/cm³, so pipe lengths are light to lift, cut and support, and crews need far less heavy lifting than on steel or ductile iron.

Corrosion-resistant by nature

The thermoplastic bore does not rust, scale or suffer galvanic attack. It handles water, wastewater, seawater, dilute acids and alkalis, and the smooth wall keeps friction losses low.

Tough joints, long runs

ABS keeps good impact strength at low temperature. Solvent cement or push-fit couplings give fast, continuous, leak-tight lines for aeration headers, sampling and chemical-duty piping.

Specifications

Technical parameters

Parameter	Value
Material	ABS — acrylonitrile butadiene styrene terpolymer
Nominal sizes	On request — state the required DN or outside diameter
Wall thickness	On request
Pressure rating	On request — confirm the working pressure of the line
Service temperature	On request — confirm the operating temperature range
Density (typical material value)	1.04 – 1.07 g/cm³
Water absorption (typical material value)	≤ 0.45 % at 23 °C
Jointing	Solvent cement (ABS cement) or push-fit / mechanical couplings
Standard lengths	On request
Fittings	Elbows, tees, couplings, reducers, sockets and caps — confirmed against the order
Reference standards	On request — tell us the standard your project specifies
MOQ / price	On request — confirm size, quantity & destination

Density and water absorption are typical published values for ABS polymer, not a batch guarantee. Every dimensional, pressure and temperature figure is confirmed in writing with the quotation.

Applications

Where it fits

Aeration & air-header pipingWater & wastewater treatment plantsSampling linesChemical dosing & dilute chemical serviceDrainage, soil & wasteSeawater & brine linesAquaculture pipingIndustrial process water

Product gallery

See the pipe up close

ABS pipes on a wet surface, two pipe ends in close-up with water droplets

Rows of grey ABS pipe with black fittings at the plant

Five ABS pipes laid diagonally on a dark background

Stacked ABS pipe ends photographed from below

ABS socket pipe ends on a wet surface in close-up

Tell us your line and duty

Send the size or outside diameter, working pressure, temperature and destination — we will confirm the right pipe grade, wall thickness, fittings and export packing.

Request a QuoteNo obligation · response within 24h (working days)

ABS
Pipe